Vinyl Floor Welding Tool Kits | Re-New Flooring Tools https://www.re-newflooringtools.co.uk/product-category/werner-muller/ Sat, 27 Jun 2026 17:28:27 +0000 en-US hourly 1 https://www.re-newflooringtools.co.uk/wp-content/uploads/2023/02/cropped-tolls-favicon-logo-32x32.jpg Vinyl Floor Welding Tool Kits | Re-New Flooring Tools https://www.re-newflooringtools.co.uk/product-category/werner-muller/ 32 32 Werner Muller Cold Weld (Paste) Type C 132g https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-c-132g/ https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-c-132g/#respond Sat, 22 Jan 2022 20:01:50 +0000 https://www.re-newflooringtools.co.uk/?post_type=product&p=11357 Cold Welding for PVC floor and wall coverings and also PVC skirtings. To create a good cold welding, stick masking tape over the joint and cut a strip alongside the joint. Inject the cold welding liquid by overflowing. Then remove the masking tape. Soldered joint scan be walked on within 10 minutes. Caution! The soldered joint completely hardens after 1 hour only.

Type C - PVC Cold Welding Paste, for watertight closing of gaps (0.3-4mm) in PVC Floor Coverings-PVC Wall Coverings

Approximate coverage of a 132g tube is 45m of seam.

The post Werner Muller Cold Weld (Paste) Type C 132g appeared first on Re-new Flooring Tools.

]]> The post Werner Muller Cold Weld (Paste) Type C 132g appeared first on Re-new Flooring Tools.

]]> https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-c-132g/feed/ 0 Werner Muller Cold Weld Liquid Type A 132g https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-a-132g/ https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-a-132g/#respond Sat, 22 Jan 2022 19:57:36 +0000 https://www.re-newflooringtools.co.uk/?post_type=product&p=11355 Cold Welding for PVC floor and wall coverings and also PVC skirtings. To create a good cold welding, stick masking tape over the joint and cut a strip alongside the joint. Inject the cold welding liquid by overflowing. Then remove the masking tape. Soldered joint scan be walked on within 10 minutes. Caution! The soldered joint completely hardens after 1 hour only.

Type A  PVC COLD WELDING LIQUID, For watertight sealing of closely cut seams in PVC Floor Coverings or PVC Wall Coverings, the tube of liquid has a coverage of Approximate 60m of seam. Instructions enclosed.

The Procedure

The patented needle system opens the seam area briefly and cold welding liquid runs along needle into the whole cross section of the seam. The adjacent edges are moistened by the cold welding liquid, temporarily dissolved and melted together, becoming strong and durable after a short period of time.

 

The post Werner Muller Cold Weld Liquid Type A 132g appeared first on Re-new Flooring Tools.

]]> The post Werner Muller Cold Weld Liquid Type A 132g appeared first on Re-new Flooring Tools.

]]> https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-a-132g/feed/ 0 Werner Muller Cold Weld Paste Type C 44g https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-c-44g/ https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-c-44g/#respond Sat, 22 Jan 2022 19:53:03 +0000 https://www.re-newflooringtools.co.uk/?post_type=product&p=11353 Cold Welding for PVC floor and wall coverings and also PVC skirtings. To create a good cold welding, stick masking tape over the joint and cut a strip alongside the joint. Inject the cold welding liquid by overflowing. Then remove the masking tape. Soldered joint scan be walked on within 10 minutes. Caution! The soldered joint completely hardens after 1 hour only.

Type C - PVC Cold Welding Paste, for watertight closing of gaps (0.3-4mm) in PVC Floor Coverings-PVC Wall Coverings

Approximate coverage of a 44g tube is 15m of seam.

The post Werner Muller Cold Weld Paste Type C 44g appeared first on Re-new Flooring Tools.

]]> The post Werner Muller Cold Weld Paste Type C 44g appeared first on Re-new Flooring Tools.

]]> https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-c-44g/feed/ 0 Werner Muller Cold Weld Liquid Type A 44g https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-a-44g/ https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-a-44g/#respond Sat, 22 Jan 2022 19:30:42 +0000 https://www.re-newflooringtools.co.uk/?post_type=product&p=11349 Cold Welding for PVC floor and wall coverings and also PVC skirtings. To create a good cold welding, stick masking tape over the joint and cut a strip alongside the joint. Inject the cold welding liquid by overflowing. Then remove the masking tape. Soldered joint scan be walked on within 10 minutes. Caution! The soldered joint completely hardens after 1 hour only.

Type A  PVC COLD WELDING LIQUID, For watertight sealing of closely cut seams in PVC Floor Coverings or PVC Wall Coverings, the tube of liquid has a coverage of Approximate 20m of seam. Instructions enclosed.

The Procedure

The patented needle system opens the seam area briefly and cold welding liquid runs along needle into the whole cross section of the seam. The adjacent edges are moistened by the cold welding liquid, temporarily dissolved and melted together, becoming strong and durable after a short period of time.

 

The post Werner Muller Cold Weld Liquid Type A 44g appeared first on Re-new Flooring Tools.

]]> The post Werner Muller Cold Weld Liquid Type A 44g appeared first on Re-new Flooring Tools.

]]> https://www.re-newflooringtools.co.uk/product/cold-weld-fluid-type-a-44g/feed/ 0